Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tanimura, Yoshihiko; Yoshitomi, Hiroshi
Nihon Genshiryoku Gakkai-Shi ATOMO
, 66(1), p.42 - 45, 2024/01
no abstracts in English
Nagai, Takayuki; Hasegawa, Takehiko*
JAEA-Research 2023-008, 41 Pages, 2023/12
JAEA-Research-2023-008.pdf:7.52MB
To reduce the risks posed by stored the high-level radioactive liquid waste (HAW), Tokai Vitrification Facility (TVF) is working to produce the HAW into vitrified bodies. With the aim of steady vitrification of HAW in TVF, the vitrification technology section has manufactured a new 3rd melter with an improved bottom structure and is working to verify the performance of this melter. In this study, solidified glass samples were taken from simulated vitrified bodies produced by flowing molten glass during the bottom drain-out test in the operation confirmation of the TVF 3rd melter. And the properties of the surface layer and fracture surface of the vitrified bodies were evaluated by using Raman spectroscopy, synchrotron radiation XAFS measurement, and laser ablation inductively coupled plasma atomic emission spectroscopy (LA ICP-AES) analysis. As a result of measuring the surface layer and fracture surface of the solidified samples produced on an actual scale, a slight difference was confirmed between the properties of the surface layer and those of the fracture surface. Since the chemical composition of these simulated vitrified bodies does not contain platinum group elements, it is expected that the glass structure of solidified glass samples is different from that of the actual vitrified body. However, this sample measuring was a valuable opportunity to evaluate samples produced by using the direct energized joule heating method. The properties of cullet used the operation confirmation of the TVF 3rd melter and the cullet of another production lot were measured and analyzed in the same manner under the measuring conditions of solidified glass samples. As a result, it was confirmed that cullet with different producing histories have different glass structures even with the same chemical composition, and that differences in glass structures remain in the glass samples after melting these cullet.
Sanada, Yukihisa; Misono, Toshiharu; Shiribiki, Takehiko*
Kaiyo Riko Gakkai-Shi, 27(2), p.37 - 44, 2023/12
This paper summarizes the general situation of marine monitoring conducted after the Fukushima Daiichi Nuclear Power Plant accident, the experience of development and operation of USVs, and the possibility of applying unmanned vessels as a tool for nuclear disaster prevention in the future. 0.01 Bq/L or less for seawater and 10 Bq/L or less for seabed soil. Operational tests of three USVs have been continuously conducted for use in such environmental radiation monitoring. Development of these UAVs is underway with a view to utilizing them for seawater sampling, direct measurement of the seafloor soil surface layer, and seafloor soil sampling, depending on their performance. It is necessary to promote the development of USVs for future nuclear power plant accidents.
Pb and 
Bi in proton-induced reactions near 100 MeVIwamoto, Hiroki; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Ishi, Yoshihiro*; Uesugi, Tomonori*; Yashima, Hiroshi*; Nishio, Katsuhisa; Sugihara, Kenta*; 
elik, Y.*; et al.
Nuclear Instruments and Methods in Physics Research B, 544, p.165107_1 - 165107_15, 2023/11
Times Cited Count：0 Percentile：0.02(Instruments & Instrumentation)The lack of double-differential cross-section (DDX) data for neutron production below the incident proton energy of 200 MeV hinders the validation of spallation models in technical applications, such as research and development of accelerator-driven systems (ADSs). The present study aims to obtain experimental DDX data for ADS spallation target materials in this energy region and identify issues related to the spallation models by comparing them with the analytical predictions. The DDXs for the (
) reactions of Pb and Bi in the 100-MeV region were measured over an angular range of 30
to 150 using the time-of-flight method. The measurements were conducted at Kyoto University utilizing the FFAG accelerator. The DDXs obtained were compared with calculation results from Monte Carlo-based spallation models and the evaluated nuclear data library, JENDL-5. Comparison between the measured DDX and analytical values based on the spallation models and evaluated nuclear data library indicated that, in general, the CEM03.03 model demonstrated the closest match to the experimental values. Additionally, the comparison highlighted several issues that need to be addressed in order to improve the reproducibility of the proton-induced neutron-production DDX in the 100 MeV region by these spallation models and evaluated nuclear data library.
Nagai, Takayuki; Okamoto, Yoshihiro; Yamagishi, Hirona*; Shibata, Daisuke*; Kojima, Kazuo*; Hasegawa, Takehiko*; Sato, Seiichi*; Fukaya, Akane*; Hatakeyama, Kiyoshi*
JAEA-Research 2023-004, 45 Pages, 2023/09
JAEA-Research-2023-004.pdf:6.07MB
The local structure of glass-forming elements and waste elements in borosilicate glasses varies with its chemical composition. In this study, simulated waste glass samples were prepared and the chemical state regarding boron (B), silicon (Si) and waste elements of iron (Fe), cesium (Cs) were estimated by using XAFS measurement in soft X-ray region. To understand the chemical stability of simulated waste glasses, XANES spectra of B K-edge, Fe L
, L
-edge, and Cs M
, M
-edge were measured on the glass surface exposed to the leachate. As a result, it was found that the glass surface exposed to the leachate was changed and it was difficult to obtain a clear XANES spectrum. From the B K-edge XANES spectra on glass surfaces exposed to the leachate, an increase in three-coordination of B-O (BO) and a decrease in four-coordination of B-O (BO) were observed compared to the glass surfaces before immersion. The XANES spectra of Fe L, L-edge, and Cs M, M-edge show that as the exposure time in the leachate increases, the Cs present on the glass surface dissolves into the leachate. The XANES spectra of Si K-edge were measured on simulated waste glass surfaces before immersion, and it was confirmed that the change in XANES spectra given by NaO concentration had a larger effect than the waste component concentration.
Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta*; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.
EPJ Web of Conferences, 284, p.01023_1 - 01023_4, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)For accurate prediction of neutronic characteristics for accelerator-driven systems (ADS) and a source term of spallation neutrons for reactor physics experiments for the ADS at Kyoto University Critical Assembly (KUCA), we have launched an experimental program to measure nuclear data on ADS using the Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University. As part of this program, the proton-induced double-differential thick-target neutron-yields (TTNYs) and cross-sections (DDXs) for iron, lead, and bismuth have been measured with the time-of-flight (TOF) method. For each measurement, the target was installed in a vacuum chamber on the beamline and bombarded with 107-MeV proton beams accelerated from the FFAG accelerator. Neutrons produced from the targets were detected with stacked, small-sized neutron detectors for several angles from the incident beam direction. The TOF spectra were obtained from the detected signals and the FFAG kicker magnet's logic signals, where gamma-ray events were eliminated by pulse shape discrimination. Finally, the TTNYs and DDXs were obtained from the TOF spectra by relativistic kinematics. The measured TTNYs and DDXs were compared with calculations by the Monte Carlo transport code PHITS with its default physics model of INCL version 4.6 combined with GEM and those with the JENDL-4.0/HE nuclear data library.
Yamamoto, Masahiko; Kono, Soma; Saegusa, Yu; Kuno, Takehiko; Sekine, Megumi; Inoue, Naoko; Noro, Naoko; Rodriguez, D.; Yamaguchi, Tomoki; Stinett, J.*
Proceedings of INMM & ESARDA Joint Annual Meeting 2023 (Internet), 10 Pages, 2023/05
The gamma-ray measurement part of the Non-Destructive Assay (NDA) course of safeguards and nuclear material accountancy was developed to focus on gamma-ray measurement allotting two days out of five days. The lectures on the basic characteristics and detection methods and mechanism of gamma-ray detectors were provided as e-learnings which were developed. The part for hands-on exercises were implemented in JAEA facility. Participants have set up each gamma-ray detector, and performed measurements of uranium and the other gamma-ray emitting nuclides. Also, uranium-235 enrichment measurements have been performed. In addition, the participants trained with a handheld gamma-ray spectrometer, HM-5, that is popular for IAEA safeguards as the preparation in the measurement exercise of fresh fuel assemblies in JRR-3, a research reactor facility of JAEA. This paper reports on the development, implementation, and feedback from participants on gamma-ray measurement part of the NDA course.
Yoshitomi, Hiroshi
Isotope News, (786), p.26 - 29, 2023/04
no abstracts in English
Sanada, Yukihisa; Tokiyoshi, Masanori*; Nishiyama, Kyohei*; Sato, Rina; Yoshimura, Kazuya; Funaki, Hironori; Abe, Tomohisa; Ishida, Mutsushi*; Nagamine, Haruo*; Fujisaka, Motoyuki*
Nihon Genshiryoku Gakkai Wabun Rombunshi (Internet), 22(2), p.87 - 96, 2023/04
Since the accident at the Fukushima Daiichi Nuclear Power Plant, many decontamination works have been carried out, but it is difficult to say that much data on workers' exposure has necessarily been analyzed in detail. In this paper, based on the GPS location information carried by the workers together with their personal dosimeters, the air dose rate in the work area and the characteristics of each type of work were analyzed. The results showed that more than 50% of the measured actual doses were more than twice the median planned dose calculated from the air dose rate and actual working hours. Furthermore, as a result of the analysis by work type, it was found that the exposure doses of demolition workers tended to be high, and that this was due to the fact that most of the work was carried out before the work was carried out to reduce the dose at the work site. In addition, when the conversion from air dose to effective dose was taken into account, there were many cases of underestimation where the planned values were lower than the measured values, and it is considered important for management to set appropriate working factor.
Nagai, Takayuki
JAEA-Research 2022-014, 84 Pages, 2023/02
JAEA-Research-2022-014.pdf:22.26MB
Most of the simulated waste glasses used for physical property evaluation are processed into a shape suitable for the measurement method from glass gob obtained by slowly cooling molten glass to room temperature. However, the actual vitrified waste glass material is obtained by cooling and being coagulated the glass drained from the bottom of glass melter into the canister. In this study, Raman spectroscopy was performed on the coagulated surface of molten simulated waste glass in the depth direction to evaluate the state of the Si-O bridging structure near the coagulated glass surface. The Raman spectra measured from the surface to the depth direction near the surface of the glasses produced by several melting and coagulation conditions of molten simulated waste glass cullet in the air atmosphere, and it was confirmed that there were changes in these spectra. On the other hand, the raw material glass cullet and the surface of the glass solidified in argon gas atmosphere showed little change in the spectrum in the depth direction, and the Si-O bridging structure near the glass surface was similar. It was also confirmed that the spectrum change in the depth direction measurement was small for the cut surface of the glass, and that the change in the spectrum for the broken glass fracture surface was also small. For glasses with a large change in Raman spectra in the depth direction near the coagulated surface, the molten glass was cooled from the molten state to room temperature in a muffle furnace with air atmosphere. That is, the magnitude of the spectral change with respect to the depth direction depends on the time from the molten state to coagulation. In order to confirm the reason why the number of bridging oxygen in the Si-O bridging structure is small on the coagulated surface of glass, the XANES spectra of Si-K edge and Ce-L3 edge were measured by XAFS on the coagulated surface and the cutting face. As a result, the Si-K edge peak on the coagulated surface is
Misono, Toshiharu; Nakanishi, Takahiro; Sanada, Yukihisa; Shiribiki, Takehiko; Urabe, Yoshimi*; Tsuruta, Tadahiko
JAEA-Research 2022-010, 134 Pages, 2023/02
JAEA-Research-2022-010.pdf:8.45MB
An accident occurred at the TEPCO's Fukushima Daiichi Nuclear Power Station (1F) in 2011 and a large amount of radioactive materials were deposited around the 1F. Japan Atomic Energy Agency has continued to conduct research on the dynamics of radioactive materials after the accident. This report summarizes the results of the survey conducted in FY 2021 on the status of marine monitoring survey on radioactive substances. Furthermore, a seabed topography and sediments distribution survey was conducted in the coastal area off the Mano River from the Ohta River to understand the topography and sediment distribution. Furthermore, in order to evaluate the inflow of radioactive Cs from the river, the horizontal distribution of the radioactive Cs concentration on the surface sediment in front of the rivers was measured. As basic information on the effects of radioactive materials on marine products, the distribution status of fish was investigated. In addition, a demonstration test of water sampling and sediment sampling was conducted using an unmanned observation vessel. From these results, we estimated the distribution and its dynamics of radioactive Cs in the sediments in the front area on the 1F.
Miyabe, Masabumi; Kato, Masaaki*; Hasegawa, Shuichi*
Journal of Analytical Atomic Spectrometry, 38(2), p.347 - 358, 2023/02
Times Cited Count：1 Percentile：0.02(Chemistry, Analytical)To develop remote isotopic analysis for the nuclids with small isotope shifts, Doppler-free fluorescence spectroscopy of Ca was performed using laser ablation plume. Counter-propagating laser beams from two external cavity diode lasers were used to irradiate the plume in order to excite the ground-state Ca atoms to the 
D state through a double resonance scheme of S
P
D. Subsequently, we measured fluorescence spectra associated with the relaxation from the D to P states. The linewidth measured at 1 ms delay after ablation under helium gas pressure of 70 Pa was found to be less than 70 MHz, which was about 1/30 of the linewidth of the Doppler-limited fluorescence spectrum. A broad Gaussian pedestal was observed at less than 600 micro-second delay in the temporal variation in fluorescence spectra, and it was most likely due to the velocity-changing collision. Additionally, the pressure broadening rate coefficient for the second-step P D transition was determined to be 46.0 MHz/torr from the spectra measured under various gas pressures. We evaluated analytical performances such as linearity of the calibration curve, limit of detection, and measurement accuracy using fluorescence signals of three naturally occurring Ca isotopes (i.e., 
Ca, 
Ca, and 
Ca). The limit of detection of isotopic abundance was estimated to be 0.09% from the 3-sigma criteria of the background. These results suggest that this spectroscopic technique is promising for remote isotopic analysis of nuclides with small isotope shifts.
Liu, S.*; Yang, D. S.*; Wang, S.*; Luan, H.*; Sekine, Yurina; Model, J. B.*; Aranyosi, A. J.*; Ghaffari, R.*; Rogers, J. A.*
EcoMat (Internet), 5(1), p.e12270_1 - e12270_18, 2023/01
Times Cited Count：18 Percentile：91.64(Chemistry, Physical)Advanced capabilities in noninvasive, in situ monitoring of sweat serve as the basis for obtaining real-time insights into human physiological state, health, and performance. Although recently reported microfluidic systems support powerful functions, most are designed as single-use disposables. Here, we introduce materials and molding techniques that bypass these concerns through biodegradable microfluidic systems with a full range of features. The key components fully degrade through the enzymatic action of microorganisms in natural soil environments. Detailed characterization of the device reveal a set of essential performance parameters that are comparable to, or even better than, those of non-degradable counterparts. Human subject studies illustrate the ability of these devices to acquire accurate measurements of sweat loss, sweat rate, pH, and chloride concentration.
Zhang, H.*; Wu, S. C.*; Ao, N.*; Zhang, J. W.*; Li, H.*; Zhou, L.*; Xu, P. G.; Su, Y. H.
International Journal of Fatigue, 166, p.107296_1 - 107296_11, 2023/01
Times Cited Count：4 Percentile：61.91(Engineering, Mechanical)Hirade, Tetsuya; Furuta, Hikaru*; Torikai, Yuji*; Fujimura, Yuki; Michishio, Koji*
JJAP Conference Proceedings (Internet), 9, p.011106_1 - 011106_7, 2023/00
Positron annihilation lifetime (PAL) measurements by use of a positron source of 
Na were performed for polycrystalline ITER-grade tungsten samples exposed to low-energy deuterium plasma. The energy of deuterium plasma was low and then it was expected that it would affect just near-surface region. However, we obtained the longer mean positron annihilation lifetime in the tungsten samples exposed to the low-energy deuterium plasma than the virgin tungsten samples. Moreover, almost same longer values were obtained even on the other (no exposed) side of the samples, although the thickness of the samples were about 2 mm. Although, there has been no report of observation of defect formation by existence of hydrogen or deuterium in tungsten, the results indicated that deuterium existence in tungsten can be one of reasons of defects formation.
Takayama, Yusuke; Sato, Daisuke*; Kikuchi, Hirohito*
Genshiryoku Bakkuendo Kenkyu (CD-ROM), 29(2), p.101 - 111, 2022/12
Swelling pressure tests have been conducted to understand the swelling properties of bentonite which is planned to be used as a buffer material in repositories for the geological disposal of radioactive waste. It has been reported that the swelling pressure obtained by swelling pressure test increases monotonically or temporarily decreases after increasing with the passage of the time depending on the initial water content. In this study, swelling pressure tests were conducted under several different initial water content conditions, and the change in wet density distribution inside the specimen during the swelling pressure tests was observed by X-ray CT measurement. It was confirmed that the presence or absence of collapse behavior and its magnitude affect the shape of the change in swelling pressure. When the collapse deformation was large, the amount of temporary decrease in swelling pressure was large. On the other hand, swelling pressure increased monotonically when there was no deformation due to collapse.
Suzuki, Kenji*; Kura, Komoe*; Miura, Yasufumi*; Shiro, Ayumi*; Toyokawa, Hidenori*; Saji, Choji*; Kajiwara, Kentaro*; Shobu, Takahisa
Zairyo, 71(12), p.1005 - 1012, 2022/12
This paper describes a stress measurement from a welded part of an austenitic stainless steel using synchrotron X-rays. Difficulty measuring the X-ray stress of the welded part is caused by the broadening of the diffraction spot in the radial and circumferential directions. The bending strains of the rectangular bar made of the welded part were measured using synchrotron white X-rays and the double exposure method. To improve the energy resolution, monochromatic synchrotron X-ray of 70 keV was used. The diffraction pattern showed the sharp arc like a pattern from texture material. The diffraction profile was obtained from the integral of the diffraction intensity in the direction of the circumference. The diffraction angle was determined using the double exposure method. As a result, the distribution of the residual stresses of the welded part could be measured.
Nagatani, Taketeru; Sagara, Hiroshi*; Kosuge, Yoshihiro*; Nakaguki, Sho; Nomi, Takayoshi; Okumura, Keisuke
Dai-43-Kai Nihon Kaku Busshitsu Kanri Gakkai Nenji Taikai Kaigi Rombunshu (Internet), 3 Pages, 2022/11
Kumada, Takayuki; Miura, Daisuke*; Akutsu, Kazuhiro*; Oku, Takayuki; Torikai, Naoya*; Niizeki, Tomotake*
Hamon, 32(4), p.165 - 168, 2022/11
We demonstrated the advantage of spin-contrast-variation neutron reflectometry on the structure analysis of buried interface between resin and porous silica layers. The interface structure was not reproduced by the normal Gaussian model, but by the asymmetric interface model where crosslinked polymer chains neither permeate the pore nor follow the surface roughness of the silica layer.
Nagai, Takayuki; Okamoto, Yoshihiro; Yamagishi, Hirona*; Kojima, Kazuo*; Inose, Takehiko*; Sato, Seiichi*; Hatakeyama, Kiyoshi*
JAEA-Research 2022-008, 37 Pages, 2022/10
JAEA-Research-2022-008.pdf:5.27MB
The local structure of glass-forming elements and waste elements in borosilicate glasses varies with its chemical composition. In this study, borosilicate glass frit and simulated waste glass samples were prepared and the chemical state regarding boron (B), silicon (Si) and waste elements of iron (Fe), cesium (Cs) were estimated by using XAFS measurement in soft X-ray region. Following results were obtained by XAFS measurements of simulated waste glass surfaces after immersion test to investigate the long chemical stability. (1) As the leaching time of glass samples in immersion test passed, the Cs M, M-edge XANES spectra disappeared and the Fe L, L-edge spectra changed. (2) A new compound was formed on the sample surface after the immersion test, and these changes in the surface state were confirmed by Raman spectroscopy. However, it became difficult to obtain a clear B K-edge XANES spectrum by forming a compound on glass surfaces. The Si K-edge XANES spectra of borosilicate glass frits with different NaO content were measured, and following was confirmed. (1) As the NaO concentration increases in borosilicate glass frit, the K-edge peak of Si shifts to the low energy side. (2) The intensity of the Si K-edge peak is maximum when the NaO content in glass frits was about 7wt%.
